Fuse

schematic:
  symbol: fuse

Pinout restrictions

• Generally there is no need to define pinout section when we have an element with only two pins.
• If there is pinout section then some naming conventions are to be respected.
• Left side pin name should begin with letter L. Example: L, L1
• Right side pin name should begin with letter R. Example: R, R1
• There may be not connected pin(s) whose name should begin with NC. Example: NC, NC1
• If there are any other pins then a symbol with enclosure and annotated pins will be generated.

Real example

TE 1206SFH:

schematic:
  symbol: fuse